Variety of interfaces for PC and video
There is an analog D-Sub input for the PC connection. A composite (BNC) input to connect video surveillance equipment such as CCTV (Closed Circuit TV) and surveillance cameras.
The monitor supports different resolution settings up to its native resolution of 1280 x 1024 pixels. Resolutions other than the native resolution can be rendered, proportionally scaled, or magnified to fill the screen. This is helpful if non-native resolutions are received or when using applications that are not capable of 1280 x 1024.
Underscan or normal view
The monitor supports both an Underscan and a normal screen view. The Underscan view shows 100% of the image and is ideal for looking at camera signals. The normal view shows 95% of the image.
Perfect viewing conditions thanks to Gamma modes
The Gama mode can be used to quickly and easily configure the monitor for different environments and illustrations. This means you can improve visibility significantly.
Light mode: Improves the general visibility of dark images.
Dark mode: Improves the visibility of images with low contrast.
Dynamic mode: Increases the general contrast ratio and improves detail accuracy.
Optimal view in any light
Thanks to its maximum brightness of 350 cd/m2, the monitor offers optimal visibility in any ambient light, even bright daylight.
Excellent image quality
Thanks to its Y/C separation, the monitor offers images free from noise and flickering. During Y/C separation, the luminance signal (Y) and chrominance signal (C), i.e. the brightness and colour information from the image signal, are separated, preventing overlap artifacts. In addition, the monitor displays 16.77 million colours clearly and vividly.
The monitor is fitted with LED backlighting to control brightness and prevent flickering. This places far less strain on the eyes when the screen is being observed for extended periods of time.
Supports PAL, SECAM and NTSC
The monitor supports PAL, SECAM and NTSC for different security and surveillance equipment.
Built-in loudspeaker for PC and video
Two build-in 0.3 Watt stereo speakers with cinch input (RDA) ensure good tone rendering. The loudspeakers support both PC and video sources.
Remote control included
You can operate the OSD menu, adjust the volume, and change between preset modes and input signals using the remote control. In addition, the monitor can be turned on and off using the remote control. The remote control is extremely practical for monitors in hard-to-reach areas or those hanging on a wall.
This may be a problem with the graphics card driver. Please install the latest driver for your graphics card and restart the PC with the monitor.
Older graphics cards may not be able to display this resolution. In this case, you will require a new graphics card with the matching output.
We cannot make a direct recommendation. The output signal should be digital and should support the maximum resolution of the monitor.
Screens have millions of pixels, which each have a surface area of less than a hundredth of a square millimetre. These elements may have defects, which are expressed by them being constantly lit or unlit. Visibility is fundamentally dependent on the surrounding area. For example, lit elements are almost invisible in a bright environment. Each LCD screen is unique in terms of pixel errors.
To give you a clear statement about what frequency of pixel errors EIZO deems tolerable, EIZO screen models are tested according to internationally recognized standards. On average the actual levels are in fact far below the tolerances across all of the devices. LCD modules that do not meet these requirements are not used at EIZO. Depending on the model, EIZO monitors have a zero pixel error guarantee for completely illuminated sub-pixels (partial pixels ISO 9241-307). Valid: six months from the purchase date.
In connection with a USB-compatible computer, the monitor acts as a hub, to which other USB-compatible peripherals can be connected.
To keep your monitor looking like new at all times and to prolong the service life of your device, we recommend cleaning it regularly. Clean the casing and LCD surface as described below:
IMPORTANT: Never use thinner, benzene, alcohol (ethanol, methanol or isopropyl alcohol), scouring agents or other strong solvents as these may damage the casing and the LCD display.
Remove marks by wiping the casing with a soft cloth, which you have previously moistened with a mild cleaning agent. Never spray wax or cleaning agents directly on to the casing. (The manual contains exact details.)
Where necessary, the monitor surface may be cleaned using a soft cloth (for example a cotton cloth or glasses cloth). Stubborn marks can generally be removed by wetting the cloth with a bit of water to increase the cleaning strength.