8. SPECIFICATIONS

LCD Panel 54 cm (21.3 inch), TFT color LCD panel with Anti-Glare Hard Coating
Viewing Angle: H: 170°, V: 170° (at contrast ratio 1:5)

Response Time: approx.30 ms
Dot Pitch 0.270 mm
Horizontal Scan Frequency Analog: 24 - 100 kHz (Automatic)
Digital: 31 - 100 kHz
Vertical Scan Frequency Analog: 49 - 86 Hz (Automatic)
(1600 x 1200: 49 - 76 Hz)
Digital: 59 Hz - 61Hz, (VGA Text : 69 - 71 Hz)
Resolution 1600 dots x 1200 lines
Dot Clock (Max.) Analog: 202.5 MHz, Digital: 162 MHz
Display Colors 16 million colors (max.)
Display Area 432 mm (H) x 324 mm (V) (17.0" (H) x 12.8" (V)) (Viewable image size: 540 mm (21.2"))
Power Supply 100-120VAC±10% 50/60 Hz, 0.75A
200-240 VAC±10%, 50 Hz, 0.4 A
Power Consumption Min.: 65 W
Max: 75 W (With USB)
Power Saving Mode : Less than 2 W ( for single signal input without USB )

Power off : Less than 1 W
Recommended Brightness 100cd/m2 or less
(with color temperature of between 5,000K to 6,500K)
Input Connector DVI-I × 2
Analog Input Signal (Sync) a) Separate, TTL, Positive/Negative
b) Composite, TTL, Positive/Negative
Analog Input Signal (Video) 0.7Vp-p/75 ohms, Positive
Input Signal (Digital) TMDS (Single Link)
Signal registration Analog : 45
Digital : 10
Plug & Play VESA DDC 2B / EDID structure 1.3
Dimensions 472 mm (W) x 459 - 541 mm (H) x 208.5 mm (D)
(18.6"(W) x 18.1"- 21.3"(H) x 8.2"(D))
Dimensions (without stand) 472 mm (W) x 373 mm (H) x 69 mm (D)
(15.7"(W) x 14.7"(H) x 2.7"(D))
Dimensions
(with hood)
483.8 mm (W) x 464.3 - 546.3 mm (H) x 323mm (D)
(19"(W) x 18.3"- 21.5"(H) x 12.7"(D))
Weight 10.2 kg (22.5 lbs.)
Weight
(without stand)
7.0 kg (15.4 lbs.)
Weight
(with hood)
10.8 kg (24 lbs.)
Temperature Operating: 0 °C - 35 °C (32 °F - 95 ° F)
Storage: -20 °C - 60 °C (-4 °F - 140 ° F)
Humidity 30% to 80% R.H. Non-condensing
USB standard USB Specification Revision 2.0
USB ports Upstream port x 1, Downstream port x 2

Default settings

Analog input
Digital input
Brightness
55%
55%
Smoothing
3
Temperature
5,000K
FineContrast Mode
Custom
PowerManager
VESA DPMS
DVI DMPM
Screen Size
Full Screen
Input Priority
Signal 1
Off Timer
Disable
Menu Settings Menu Size
Normal
Menu Off Timer
45 seconds
ActievRotationII
Enable
Beep
On
Language
English
Input Selection
Standard

 

Beeper settings

Short beep ScreenManager item selected.
ScreenManager parameter adjusted to minimum or maximum limit.
Input Signal Selection button pressed.
Long beep Auto Adjustment button pressed.
ScreenManager data-save executed.
4 short beeps Monitor not connected correctly.
PC turned off.
Monitor received unsupported signal frequency.
2 short beeps every 15 sec. Monitor is in the advance notice mode of the Off Timer. The power will be off within fifteen minutes.

Dimensions

Unit mm (inches)

 

Pin Assignment

DVI-I Connector
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
TMDS Data 2-
11
TMDS Data 1/3 Shield
21
NC
2
TMDS Data 2+
12
NC
22
TMDS Clock Shield
3
TMDS Data 2/4 Shield
13
NC
23
TMDS Clock+
4
NC*
14
+5V Power
24
TMDS Clock-
5
NC
15
Ground (return for +5V, Hsync and Vsync)
C1
Analog Red
6
DDC Clock (SCL)
16
Hot Plug Detect
C2
Analog Green
7
DDC Data (SDA)
17
TMDS Data0-
C3
Analog Blue
8
Analog Vertical Sync
18
TMDS Data0+
C4
Analog Horizontal Sync
9
TMDS Data1-
19
TMDS Data0/5 Shield
C5
Analog Ground (analog R, G, & B return)
10
TMDS Data1+
20
NC
(*NC: No Connection)
USB Ports
No.
Signal
Remarks
1
VCC
Cable power
2
-Data
Serial data
3
+Data
Serial data
4
Ground
Cable Ground