1. INTRODUCTION

Thank you very much for choosing an EIZO Color Monitor.

 

1-1. Features

  • The exclusive use calibration software calibrates the monitor characteristics and generate colorprofile.
  • Dual inputs compliant
  • DVI Digital input (TMDS) compliant.
  • ADC (Apple Display Connector) inputs compliant.
  • [Horizontal scanning frequency]
    Analog: 31 - 94 kHz
    Digital: 31 - 76 kHz
    [Vertical scanning frequency]
    Analog: 49 - 86 Hz Vertical (1600 x 1200: 49 - 76 Hz, 1920 x 1200: 49 - 61 Hz)

    Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz))
    [Resolution] 1920 dots x 1200 lines
  • Support to sRGB standard
  • The height adjustable stand incorporated
  • Attaching the "Adjustment Certificate" to describe the monitor color characteristics individually.

 

1-2. Package Contents

Please contact your local dealer for assistance if any of the listed items are missing or damaged.

 

* LCD Monitor * Calibration software "ColorNavigator" (in the CD-ROM)
* Power Cord
* Signal Cable (FD-C39) * Setup Guide
* Signal Cable (FD-C16) * ColorNavigator Quick Reference
* EIZO USB Cable (MD-C93) * LIMITED WARRANTY
* EIZO LCD Utility Disk * Adjustment Certificate
*
User's Manual (in the CD-ROM) * Cleaning kit "ScreenCleaner"
* Hood

 

*
Please retain the packing materials for future transference.

 

1-3. Controls & Connectors

Front

 

(1)
ScreenManager®
(2)
Mode Switch
(3)
Auto Adjustment Switch
(4)
Enter Switch
(5)
Directing Switch (Left, Down, Up, Right)
(6)
Input Signal Selection Switch
(7)
Power Switch
(8)
Indicator lamp*1
Name
The monitor status when each lamp on
Left Side
Custom
Custom mode of FineContrast Mode
sRGB
sRGB mode of FineContrast Mode
EMU
EMU mode of FineContrast Mode
CAL
CAL mode of FineContrast Mode
Cal. Alert
Notify that the monitor needs to be recalibrated in CAL mode or EMU mode.
Right Side
Adj. Lock
The monitor functions are locked.
Signal 1
Input signal from SIGNAL 1 is displayed.
Signal 2
Input signal from SIGNAL 2 is displayed.
ON
Operation
Power Save
Power saving
*1
The brightness of indicator lamps can be changed and turned off, when the screen is displayed (Operation mode). See "Indicator setting".

The power status of the monitor when each lamp on
Indicator Lamp
Power status of the monitor
ON
Power Save
Light
Off
Operation
Off
Light
Power Saving
Off
Off
Power off

*
The unit is designed to be operated with your bare fingers. If you touch the control panel with your gloved fingers or with something left on the control panel, it may not work.
*
If there are waterdrops or dew condensation on the control panel, or operating with wet fingers, it may not work properly. In that case, be sure to dry or wipe it up before use.

 

Rear

 

(9)
USB Port (2 Downstream)
(10)
USB Port (1 Upstream)
(11)
Height Adjustable Stand (Detachable)*2
(12)
Security Lock Slot*3
(13)
DVI-I Input Connector (SIGNAL 1, SIGNAL2)
(14)
Power Connector

*2
The LCD monitor can be used with an optional arm stand by removing the stand. (See "2-6. How to remove the Tilt Stand").
*3
Allows for connection of a security cable. This lock supports Kensington's MicroSaver security system.
For further information, please consult:
Kensington Technology Group
2855 Campus Drive, San Mateo, CA 94403 USA
Tel: 800-650-4242, x3348
Intl: 650-572-2700, x3348 / Fax: 650-572-9675
http://www.kensington.com